Correcting a Diagram on Magnetic Field and Electric Current

How can Dante correct the diagram?

1) Move the wire upward instead of downward 2) Connect the wire to both ends of the ammeter 3) Change the wire from coiled to straight 4) Place the wire between the poles of the magnet and not move it

Final answer:

To correct the diagram, Dante should move the wire upward instead of downward, connect the wire to both ends of the ammeter, change the wire from coiled to straight, and place the wire between the poles of the magnet and not move it.

Explanation:

To correct the diagram, Dante should:

  1. Move the wire upward instead of downward: The diagram currently has the wire labeled with a downward arrow, which indicates the incorrect direction of movement. The wire should be drawn with an upward arrow to show the correct direction.
  2. Connect the wire to both ends of the ammeter: The wire in the diagram is only connected to the red terminal of the grey box. To accurately represent the setup, the wire should be connected to both the red and blue terminals of the grey box, forming a complete circuit.
  3. Change the wire from coiled to straight: The diagram depicts the wire as coiled, but in order to induce an electric current, the wire should be straight. Straightening the wire will ensure a consistent magnetic field is created to induce the current.
  4. Place the wire between the poles of the magnet and not move it: The diagram shows the wire passing through a trough with bar magnets running on each side. However, to induce an electric current, the wire should be stationary between the poles of the magnet, rather than running through a trough.
← Current and power consumption of lamps Magnifying glass magic how does it work →